The Boats

36 Offshore Center Console "Daytona" Previous

  • 00_runnin_hard.JPG
  • 01_overhead_forward.jpg
  • 02_aft_running.jpg
  • 03_Happy Greg.jpg
  • 04_running the cones.jpg
  • 05_helo_starboard_turn.jpg
  • 06_lit_up_console.jpg
  • 07_Jig.jpg
  • 08_Jig3.jpg
General Specifications:

Specifications, including hydrostatic information, are provided as a convenience only and may change without notice. These proposed targets are approximate and are heavily dependent on choices made during construction such as material weights and other subsequent factors such as engine size and loading of the vessel during actual use.

Designation: 36OCCOK
Name: Daytona
Series: Offshore
Centerline Length (Hull Only): 36 ft / 11 m
Maximum Beam: 9 ft / 2.7 m
Target Draft (Hull Only): 28 in / 71 cm
Notes on Draft:

Predicted draft at Target Displacement
(See Notes on Displacement below)

Target Displacement: 15,500 lbs / 7030 kgs
Notes on Displacement:

Fully loaded at Designed Waterline: People, Fuel, Motor(s), Consumables, etc. This is a better figure for evaluating a boat in real world conditions..

Maximum Recommended Horsepower: 1050
Deadrise at transom: 20°
Deadrise at midships: 27°
Deadrise at entry: 50°
Waterline length: 29 ft 10 in / 9 m
Hull Surface Area: 566 sq ft / 53 sq m
Notes on Hull Surface Area:

When considering a new boat build, the Hull Surface Area is a good indication of the relative size of one boat compared to another.

Runnin' Like A Racecar

This boat was designed for NASCAR Racing Star Greg Biffle and masterfully built by Xcelerator Boatworks.

Obviously, high performance and wonderful handling are crucial. She fit the bill perfectly.

"You have to experience the ride!", says Greg.

Thank you sir.

Leave a Comment