GEM Products, Inc / GEMLUX

More
4 years 1 month ago #9652 by RobWhite
RobWhite replied the topic: GEM Products, Inc / GEMLUX
Thanks Marcus. I will give you a call.

Please Log in or Create an account to join the conversation.

More
4 years 1 month ago #9649 by Oceanfisher1010
Oceanfisher1010 replied the topic: GEM Products, Inc / GEMLUX
Hey Rob,
Sorry for the delay in response. We were at IBEX all last week.
Anyhow, the Gemini series is the older version of our slams. We've improved quite a few things and branded the newer latches as the "Stellar" series. I could certainly recommend a Stellar over a Gemini. We keep the Gemini's available for replacement part reasons.
If it's for your console door, you may consider our small lift and turn compression latch. The 4024-xxxx line. There are a few benefits over the slam:
1. The compression latch will not allow the console door to rattle. The slam latch has to be dialed in perfectly, and adjusted occasionally to keep the door from rattling.
2. If you gasket the door, it will create a "dry storage" area for you. Again, a slam would have to be dialed in perfectly.
3. Most of our high end builders are using compression latches on console doors.
Feel free to call me anytime. My cell is 904-237-3724. I'm traveling Wed thru Friday this week, so the cell is the best way to reach me.
Marcus Perry

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #9638 by RobWhite
RobWhite replied the topic: GEM Products, Inc / GEMLUX
Hey Marcus,

What is the difference between the Stellar Slam and Gemini Slam latches?

Rob

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #9496 by Oceanfisher1010
Oceanfisher1010 replied the topic: GEM Products, Inc / GEMLUX
Hey Marolina,

Sorry for the delay. I've been traveling quite a bit lately. I have a few templates and molds I can provide. Please let me know what you're looking for and I'll check on molds.

Marcus

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #9450 by marolina
marolina replied the topic: GEM Products, Inc / GEMLUX
great stuff. we love and use your rod holder wheels and alike ! love to get some plug dumbys for molds !

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #9441 by Oceanfisher1010
Oceanfisher1010 replied the topic: Re: GEM Products, Inc / GEMLUX
Nice talking with you today Marc. Things have been crazy lately for me too. 2014 models coming out and friction hinges have kept me slammed. Looking forward to chatting on Saturday. Considering the work these guys (and I in the near future) are doing, I have a few suggestions for your hardware applications. We're all tired of bleeding stainless hardware and fasteners.

Talk to you Saturday. Go NC State Soccer!!!

And, GO GATORS,

Marcus Perry
GEM Products

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #8937 by welder 59
welder 59 replied the topic: Re: GEM Products, Inc / GEMLUX
Ditto

1989 Boston Whaler Newport 17 Honda 75
Unknown Boston Whaler 14
1986 Sou'wester 25 Isuzu Diesel

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #8933 by RobWhite
RobWhite replied the topic: Re: GEM Products, Inc / GEMLUX
Thanks Marcus,

I look forward to seeing your 19 flats boat come together. I see a Gemlux steering wheel in my future along with a host of other stuff from your company.

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #8900 by Oceanfisher1010
Oceanfisher1010 replied the topic: Re: GEM Products, Inc / GEMLUX
Yes sir! Call me on the cell. Lets talk about the 19' too.

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #8898 by MarcS
MarcS replied the topic: Re: GEM Products, Inc / GEMLUX
Talk again tomorrow?

"dedicated to your success"

Please Log in or Create an account to join the conversation.

Time to create page: 0.267 seconds